+86 188 0536 5955 sales@jindaconveyor.com
Belt Conveyor & Roller Conveyor Manufacturer & Exporter | Weifang, Shandong, China
Get a Quote
Home/Cases
Cases

Application Cases

Representative conveyor layouts by industry. Customer names are not published; each case describes the requirement, the configuration supplied and the result.

Food grade belt conveyor line installed in a food plant
Food & Beverage

Food Plant Conveyor Line

Requirement
A food processing workshop needed a continuous transfer path from portioning to packing, with a frame that could be washed down at the end of each shift.
Solution
A food grade belt conveyor with a stainless steel 304 frame and PU belt was built to the available line length, with open frame sections for cleaning access and adjustable side guides for different tray sizes.
Read the case
Multi-station belt conveyor workbench assembly line
Electronics & Light Industry

Workbench Assembly Line

Requirement
An assembly workshop needed defined operator stations with a controlled product flow, instead of passing parts between separate tables by hand.
Solution
A multi-station belt conveyor workbench was built with a lighting frame, tool rail and power sockets at each position. Belt speed and station spacing were set to the assembly steps and takt time.
Read the case
Chain plate conveyor carrying cans between filling machines
Food & Beverage

Bottle & Can Transfer Line

Requirement
Containers had to stay upright and evenly spaced across a wet section between filling and labelling machines.
Solution
A stainless steel chain plate conveyor with adjustable guide rails was matched to the container diameter and to the height of the connected machines.
Read the case
Mobile telescopic conveyor at a loading dock
Logistics & Warehousing

Truck Loading & Unloading Line

Requirement
Operators were walking the full length of a vehicle repeatedly to load cartons, which limited dispatch throughput at peak times.
Solution
A mobile telescopic conveyor and flexible gravity roller sections were set to the dock height and vehicle depth, so the loading point stays at one fixed position.
Read the case
90 degree turning conveyor in a compact packing line
Packaging

Compact Line with Turning Section

Requirement
A packing line had to change direction around existing equipment without adding a transfer point where cartons could jam.
Solution
A 90 degree belt turning conveyor with a guided belt and custom inner radius was inserted between two straight belt conveyors at matched height and speed.
Read the case
Workbench conveyor line used for packing and inspection
General Manufacturing

Packing Workbench Transfer

Requirement
Inspection and packing were done on separate tables, with products carried between them manually.
Solution
A belt conveyor workbench was extended into a packing line with a turning section, feeding a straight belt conveyor to the dispatch area.
Read the case

Have a Similar Application?

Send us your product and layout. We will recommend a configuration used for comparable lines.

Request a Quote
Get in touch

Tell Us About Your Conveyor Project

Send the product details and your floor layout. Our engineers will come back with a recommended configuration and a quotation. Drawings and photos are welcome.

Phone / Mobile
+86 188 0536 5955
Email
sales@jindaconveyor.com
Factory
Lepushan Ecological Economic Development Zone, Weicheng District, Weifang, Shandong, China

Your inquiry is ready. If your email app did not open, tap the button below to send it to 18805365955@163.com.

Send Email Now

We normally reply within one business day. Your details are used only to answer this inquiry.